Going from the inside.... OUT!

Here We go! The outside. This was super easy and don't freak out.

Alright! So when I was reading how to put this back together on the blog Im following. She talked about how her chair came with cardboard that is under the rolled part of the arm. I guess my chair is so old that it didn't have it. So for me and if you don't have this. Measure from front to back. Cut about an inch wide stripe of cardboard.

Step eh...whatever. Cut out the fabric for the outside of the arms

This might sound weird but lay the fabric wrong side out over the arm. Pull some of the fabric down to where it goes a little over where you would put the piece of cardboard.

Then put the cardboard and staple it down. Pull the fabric around so that the right side is out and you can see the nice straight edge it gives you.

Hope this clarifies it better

Staple down the bottom

Staple the Front. Here again you need to pay attention to the detail and folding when you staple. You also need to make sure you keep the staples close together. I only say this because when you put the piece on top over it. You don't want just one little staple to stick out. Im having a few of those mistakes. *SIGH*

Then staple the back.

WOW! Super Easy